Top Shelf

The oven unit that we were working on before needs a small section of concrete putting in to fill the gap between the shelf and the top of the oven. We couldn’t do this before because until the shelf for the oven was constructed we couldn’t tell exactly where the oven would sit. It’s a little tricky as it’s only a small section, that sits at the front the unit.

First two supports are screwed to the side walls.

Then a board is slid in place.

A board is mounted to make the back of the concrete.

A couple of small bits are added to reinforce the whole lot and fix it to the rest of the unit.

Then the boards at the front are fitted more will be added as we pour in the concrete.